The number of people who own a Macbook has increased over the years. In 2018, it was estimated that there were about 18 million Macbook users in the United States alone.

It is a significant increase from the 14 million Macbook users in 2016. Have you ever noticed how much dirt and dust accumulates in your Macbook’s speakers?

Cleaning them correctly can be challenging, but with some elbow grease, you can get them looking and sounding new again. This blog post will outline the steps needed to clean MacBook’s internal speakers.

Remember that while cleaning the speakers, you should avoid getting liquid inside the MacBook. So take precautions and be careful! Let’s get started!

How To Clean MacBook Speakers?

Following the steps below, you can clean your MacBook’s internal speakers.

Step1:

The first step is to Turn off your MacBook and unplug it from any power source.

Step2:

Then, you need to remove the bottom case of your MacBook. To do this, first, locate the 12 small screws on the underside of your MacBook.

Using a Phillips head screwdriver, you can remove these screws. Once the screws are removed, carefully lift the bottom case off your MacBook. Be careful not to lose any of the screws!

Step3:

Now that the bottom case is removed, you should be able to see the speakers on each side of the logic board. Clean the speaker grilles by blowing out any dust or dirt that has accumulated in the speaker grilles.

Be sure to aim the compressed air at the speaker grilles and not directly at the speakers themselves.

Step4:

Next, use a dry cloth to wipe down the speakers and the area around them. Be careful not to get any liquid on the logic board or other sensitive components.

Step5:

Once you have finished cleaning the speakers and the surrounding area, replace the bottom case of your MacBook and screw it back into place. Then, plug your MacBook back in and turn it on. Your speakers should now be clean and free of dirt and dust!

What Can I Do If Macbook Speakers Don’t Work After Cleaning?

If your speakers are still not working after following the above steps, there may be a more serious issue. You may need to take your MacBook to an authorized Apple service provider for further diagnosis and repair.

There are chances of broken speaker wire which needs to be repaired by a professional. Therefore, make an appointment with the nearest Apple service provider.

Conclusion:

We hope this guide helped teach you how to clean your MacBook’s internal speakers. Remember to take precautions and be careful not to damage any sensitive components inside your MacBook. You can comment below if you still have some queries related to this. You will surely hear from our team soon.